Search results

Try a factory reset on the T8 SE and see if there is any difference. There is a guide at https://droidbox.co.uk/how-to/accessing-your-droidboxs-recovery-menu/

My guess is it is the extender if changing channels is greatly affecting it. The extender should be in the middle area between the router and device for the best performance, otherwise the extender may not have a strong enough signal. So if the router is at one side of the house, the extender...

Is it possible to pick say a country that is closer. For example, if you are in UK, then you could pick France or Germany.

What Android box are you using? How far away is the box to your router, is there anything in between such as a wall or floor? Have you tried changing the wireless channel on your router?

Thanks for the update. I use IPVanish and you should be getting more than 10mbps. I get 50 on mine.

Great, thanks for the update, we are glad to hear it is working now.

Was the controls working before you updated the firmware? It should not have any display glitches on original firmware so it may be a hardware issue. If you have not already please email us at [email protected] with your order number and if possible a photo of the glitches and we can set up a...

You may need to assign a drive letter to the main partition so Windows can find it. You can use Mini Tool Partition Wizard to do this. Right click on the main partition and assign a drive to it.

I think we replied to your email earlier today. If you had tried holding START + LEFT for several seconds until the LED flashes purple to activate the controller? Please let us know by email if you have not already and we can set up a return for inspection. Thanks.

Please check that the Micro SD Card is fully inserted and has no dirt on the contacts. Have you tried installing custom firmware on the device? If not then you could try that, there is a guide at https://www.droidboxforums.com/threads/rg300-custom-firmware-v271019.18025/ or email us at...

We spoke on the phone earlier and are looking into it. We will reply back after. Thanks.

Please see above reply. We are currently testing the firmware and hope to have it released as an OTA update soon.

Are you inserting the card the correct way around, it will only go in one way. Other than that you will need to contact where you purchased it from as we do not sell the PlayGo model.

The error message you are receiving is a generic message which means your devices are already up to date. There have been no new firmware updates to them for some time. You can however update any apps via the Google Play Store.

They do take a while for it to charge, it could be up to 4 hours. I have not checked as I cant remember if the LED goes out. I will check when next using it and update here.

If you go back to the full settings menu you will see developer options near the bottom of the list.

When in full screen mode you can swipe up from the bottom with the mouse and the bottom bar should appear. I attached an image of what the homescreen will look similar to. Obviously the apps may be different depending if you have installed others.

Did you try the other suggestions? If so what were the results?

For the BBC games, there is a chance they may need to be unzipped as the emulator does not support zipped files. You can do this with 7zip at https://www.7-zip.org/ for example. Also check that you are in the right folder. I copy everything on PC and not on the device, it is much faster and...

There should not be any reason why it would be slower on the Android device than Windows unless there is something in the app itself restricting it. Check in the settings of the app to see if there is a speed limiter, or maybe a timer to enable/disable speed limit. If it is possible can you...