Hi have hdmi lead to tv and optical and audio lead red and white ports on back of box to my amp what would be the best way to set up my box thanks
How do you get into Kodi? Silly question I know but want to know i am looking in the right placeNormally to get 5.1 you need to set kodi in system, system and Audio output and set it to 2.0 and DD capable receiver and transcoding.
You might have to change the setting level to Expert...this is in the bottom left corner. Just click on it to change the level....
cheers found them all and left little box bottom left on advanced is that OK thanks for your helpGo into kodi (xbmc),then when it loads you have a menu bar with Video, Programs, Music and system. Go to system and click on it and then system again and then audio output. Make the above changes here, best of luck and enjoy.
Dave S
Is power movie's a tab/addon somewhere if so where? ThanksUse the optical to your amp if you can't plug the HDMI straight to it, which is better. Then when you start your box up go to the two cogs (setting) and advanced, here you need passthrough selected and check the other audio setting here. Don't select DTS HD as it won't work with optical out.
Now go into kodi and then system, system and Audio and here make sure you select 2.0, DD capable receiver, DD transcoding and passthrough here as well. Should be good to go now...make sure you select the right input on your amp. If you need to check the amps instructions for Audio inputs.
Hope this helps you..get more power movies, it has loads of 5.1 movies aswell as icefilms and Primewire.
Use the optical to your amp if you can't plug the HDMI straight to it, which is better. Then when you start your box up go to the two cogs (setting) and advanced, here you need passthrough selected and check the other audio setting here. Don't select DTS HD as it won't work with optical out.
Now go into kodi and then system, system and Audio and here make sure you select 2.0, DD capable receiver, DD transcoding and passthrough here as well. Should be good to go now...make sure you select the right input on your amp. If you need to check the amps instructions for Audio inputs.
Hope this helps you..get more power movies, it has loads of 5.1 movies aswell as icefilms and Primewire.
Use the optical to your amp if you can't plug the HDMI straight to it, which is better. Then when you start your box up go to the two cogs (setting) and advanced, here you need passthrough selected and check the other audio setting here. Don't select DTS HD as it won't work with optical out.
Now go into kodi and then system, system and Audio and here make sure you select 2.0, DD capable receiver, DD transcoding and passthrough here as well. Should be good to go now...make sure you select the right input on your amp. If you need to check the amps instructions for Audio inputs.
Hope this helps you..get more power movies, it has loads of 5.1 movies aswell as icefilms and Primewire.
I am having a problem similar to this...if I switch veira link to TV the volume works, if on surround no volume and it locks everything up. All I have to do is change it to hdmi pass through in settings and then in the kodi settings?Use the optical to your amp if you can't plug the HDMI straight to it, which is better. Then when you start your box up go to the two cogs (setting) and advanced, here you need passthrough selected and check the other audio setting here. Don't select DTS HD as it won't work with optical out.
Now go into kodi and then system, system and Audio and here make sure you select 2.0, DD capable receiver, DD transcoding and passthrough here as well. Should be good to go now...make sure you select the right input on your amp. If you need to check the amps instructions for Audio inputs.
Hope this helps you..get more power movies, it has loads of 5.1 movies aswell as icefilms and Primewire.