No signal

[Keg62]

Hi guys I have an M8 and M8s both were set up on my living room Samsung tv but if I try to use either of them on any of the two other TVs I have I get a no signal message after the M8 boot up logo disappears both ok when put back on Samsung any ideas please

 

[shah nissar]

Check if the HDMI ports on the other TV is functioning properly. You can check by testing some other devices through HDMI on those TV's. Also make sure you are using the right adapter for each of these boxes.

 

[ChrisM]

Not sure about the M8-S model, might need to check with the original manufacturer, but I'd check for Auto HDMI mode in the device's Settings. Turn it off, and (temporarily at least) set the mode to 720p @ 60Hz. Press the Return (arrow doing a limbo) button on your remote, then turn it off. Now connect it to the TV that doesn't normally work and try booting up.