Network problems

[skynet2001]

Hello All, who can help.
Since the November update it is not possible to make a network connection, this is for wireless as cabled.
In Open Elec all works ok, connections are visible and to use.
The november update i installed without factory settings.
Also the performance of open elec network is lower then before the update to libre.
Is it possible to do a downgrade to open elec(instead of libre elec)

Thanks in advance

 

[sblabs]

try doing a full reset in recovery menu see if it will fix your problems, when updating Firmware i always recommend you do a full reset and do a fresh start.

https://droidbox.co.uk/how-to/accessing-your-droidboxs-recovery-menu/?hilite=full+reset

 

[skynet2001]

Hallo sir,your correct, in the meantime I placed a facotry reset and netwerk connecties were availlable in setup.
Thanks for the tip

 

[skynet2001]

However after reboot networkconnection was gone

 

[skynet2001]

After factory reset it is not possible to select a network connection(wifi and cable)
in setup, how can this be ?

 

[sblabs]

what do you see when you go to settings and click on the network tab.

 

[skynet2001]

i have 2 options (wifi and ethernet),wifi i can select(gives error),ethernet if i select this it stays on connecting(more then 1/2 hour)

 

[sblabs]

do 1 more full reset see how you get on.

 

[skynet2001]

What could be different then the other 2 attemps

 

[sblabs]

well you never know odd things can happen, its worth a go

 

[skynet2001]

I Will let you know asap

 

[palpatine]

Ive pulled out my ethernet and tried wi fi and everything is fine!!!
I have noticed the video performance has started to lag and stutter (not buffer)

 

[skynet2001]

Ok ,what i notice is that the wifi ico is selectable in the setup of the network and ethernet not.To me a possible bug in the software.
While in Libre Elec ,ethernet is availlable and selectable

 

[cawley7793]

How can I delete a ip adress on my droidbox t8-s in set up mode

Sent from my SM-G930F using DroidBOX Forums mobile app

 

[Nigelar]

Why would you want to do that? Isn't the ip address allocated by your router?

 

[Hightone10]

Ok ,what i notice is that the wifi ico is selectable in the setup of the network and ethernet not.To me a possible bug in the software.
While in Libre Elec ,ethernet is availlable and selectable

Have you tried to reboot with the earthnet lead not connected if that does not work try factory reset with earthnet lead unplugged