mx box
- Thread starter doz1990
- Start date
Does it power on, can you set it up, is it just no picture in XBMC (kodi). If it's the latter then watch this video it may help.
Hope this helps.
Hope this helps.
If it's just no picture on the TV at all then check you have the right input on your TV(using remote). Try another HDMI cable and try another input most TVs have more then one.
How old is the box...if you have another TV try it on that one.
How old is the box...if you have another TV try it on that one.
Normally Ethernet is better but you need to be able to set it up first.
I would get your friend the heads up as it's not working.
The only thing I can think of is the input on your TV.
I would get your friend the heads up as it's not working.
The only thing I can think of is the input on your TV.
Make sure on your TV it's switched to the correct input, ie HDMI 1.
Normally on your remote press the AV button, but that depends on TV manufacturer.
Normally on your remote press the AV button, but that depends on TV manufacturer.
There's one more thing you could try after that and it's a factory reset.
You need to find you reset button on your box...
Then power off and push the reset button in(tooth pick if you have one) and hold it in and power on. Keep hold for 10 secs then the recovery menu should pop up.
If you not sure then ask your friend to help....
Sorry I haven't been able you help sort it out for you.
Good luck
You need to find you reset button on your box...
Then power off and push the reset button in(tooth pick if you have one) and hold it in and power on. Keep hold for 10 secs then the recovery menu should pop up.
If you not sure then ask your friend to help....
Sorry I haven't been able you help sort it out for you.
Good luck
Yes sometimes it's in the AV slot, that's why you need a tooth pick.
Then push this until you feel resistance then power on still holding this button down.
Then push this until you feel resistance then power on still holding this button down.
First thought is 1080p mode (or a specific refresh rate) being manually set using your friends TV previously that your TV can't handle.
If a different TV works OK, head to Settings and look for an area to change the HDMI mode to 720. Make sure it sets OK, then plug back into your original TV.
If a different TV works OK, head to Settings and look for an area to change the HDMI mode to 720. Make sure it sets OK, then plug back into your original TV.