HDMI CEC

[very_random_man]

Hi. I recently got a t8-s plus v2 and I'm struggling a bit to get the HDMI CEC working. I found the settings for the CEC Adapter under Input > Peripherals but it doesn't seem to work. The weird thing is that I'm pretty sure it worked to some degree when i first configured it.

Has anyone else had any issues with it? Would anyone be able to direct me to some documentation or configuration tips, please?

My set up is Droidbox > Onkyo AV receiver > Panasonic TV. I also have a Chromecast and a PS4 plugged into the AV receiver and they work fine with HDMI CEC.

 

[Bollocks77]

I used CEC on my T8 Mini and my TV remote could control everything. I am sorry I cant help with your box model but surely there must be a way.
Dave

 

[very_random_man]

Yeah i reckon so. I'm certain it was working briefly when i first turned it on. Do you think this is a Restore to Factory Settings job? ;-)

 

[8bitDev]

Hi. I recently got a t8-s plus v2 and I'm struggling a bit to get the HDMI CEC working. I found the settings for the CEC Adapter under Input > Peripherals but it doesn't seem to work. The weird thing is that I'm pretty sure it worked to some degree when i first configured it.

Has anyone else had any issues with it? Would anyone be able to direct me to some documentation or configuration tips, please?

My set up is Droidbox > Onkyo AV receiver > Panasonic TV. I also have a Chromecast and a PS4 plugged into the AV receiver and they work fine with HDMI CEC.

Hi

Can you tell us if you tried to perform factory reset on your box and if it make any difference?

Regards

 

[Bollocks77]

Im not sure mate. I never had to.

 

[very_random_man]

Can you tell us if you tried to perform factory reset on your box and if it make any difference?

I tried a factory reset and it still wouldn't work. Should it work out of the box?

Just trying to think how best to test where it's going wrong. I suppose I could plug it directly into the TV and see if that works.

 

[very_random_man]

Right. I seem to have got to the bottom of the problem!

It's not a software thing. The HDMI cable that came bundled with the Droidbox isn't good enough. I swapped cables with my PS4 and it's working properly now. I think cables need to be HDMI 1.4 compliant. I'd imagine 3D probably wont work with it either. I guess I must have been hallucinating when i thought it was working. ;-)

I think I would have preferred to receive no cable than one that didn't do the job. No matter though as it's working now.

 

[Nigelar]

I had a similar issue when connecting my tv to a soundbar. I tried some of my spare old hdmi leads and they didn't work. I bought a better spec one off amazon and it worked.
The usually supplied hdmi from droidbox is good enough for normal tv connection which is most people's need.
Your experience and mine suggest that buying better quality leads (or optical) is recommended when using digital music connections on any device.

 

[8bitDev]

Right. I seem to have got to the bottom of the problem!

It's not a software thing. The HDMI cable that came bundled with the Droidbox isn't good enough. I swapped cables with my PS4 and it's working properly now. I think cables need to be HDMI 1.4 compliant. I'd imagine 3D probably wont work with it either. I guess I must have been hallucinating when i thought it was working. ;-)

I think I would have preferred to receive no cable than one that didn't do the job. No matter though as it's working now.

Hi

Thank you for letting us know.We will investigate the issue and see where did the problem occur.

Can you tell us if you only changed the lead,or hdmi port together with the lead that was used before?

Regards

 

[very_random_man]

Hi. I basically unplugged the PS4 and plugged the cable into the back of the Droidbox. So it's technically possible it's not the cable but the HDMI port on my AVR. I've ordered a new cable anyway so I'll be able to confirm or deny this in a few days.

 

[8bitDev]

Hi. I basically unplugged the PS4 and plugged the cable into the back of the Droidbox. So it's technically possible it's not the cable but the HDMI port on my AVR. I've ordered a new cable anyway so I'll be able to confirm or deny this in a few days.

Hi

Please re check with the cable supplied by us once more as it can be that MHL based hdmi port caused the issue.

Regards

 

[very_random_man]

There is an MHL port on the AVR but I wasn't using it. I was using a port designated for Blu-ray players which is CEC-enabled. I'll do a more thorough test when i get a moment next week and let you know.

 

[8bitDev]

There is an MHL port on the AVR but I wasn't using it. I was using a port designated for Blu-ray players which is CEC-enabled. I'll do a more thorough test when i get a moment next week and let you know.

Thank you for letting us know.

Regards and have a nice weekend

 

[very_random_man]

Hi folks. I'm sure you've been biting your nails waiting for an update! ;-)

I can confirm that the cable was the issue. The Kodi wiki seems to indicate there may be a problem with less expensive cables (http://kodi.wiki/view/CEC#Common_Issues_with_CEC). No matter though as it's working now. I probably ought to state that I've always been very happy with my Droidbox and have just been trying to iron out some kinks.

On a related note, is there any configuration or button press on the remote that would use CEC to change AVR source back to the Droidbox when it's already switched on? Source-switching works fine on startup but if I've got the Droidbox and PS4 both on, how would i switch back to the Droidbox. With the PS4 you just press the PS4 button on the controller and it sends some kind of active source message and the AVR switches over to it.

 

[8bitDev]

Hi folks. I'm sure you've been biting your nails waiting for an update! ;-)

I can confirm that the cable was the issue. The Kodi wiki seems to indicate there may be a problem with less expensive cables (http://kodi.wiki/view/CEC#Common_Issues_with_CEC). No matter though as it's working now. I probably ought to state that I've always been very happy with my Droidbox and have just been trying to iron out some kinks.

On a related note, is there any configuration or button press on the remote that would use CEC to change AVR source back to the Droidbox when it's already switched on? Source-switching works fine on startup but if I've got the Droidbox and PS4 both on, how would i switch back to the Droidbox. With the PS4 you just press the PS4 button on the controller and it sends some kind of active source message and the AVR switches over to it.

Hi

This should be available for change in the AVR switch itself,or if there is a hdmi input that takes priority you can use it to set the one that you prefer.

Regards