If you aren't sure what a BIOS is or haven't encountered any problems, you can safely ignore this video/thread.
How to update the BIOS
1. power on the device
2. enter factory mode (press the "shift+Fn +ctrl +F3" enter the factory mode)
2. Download the BIOS from https://mega.nz/#!6sF2jRSR!FnAmETJ059tqIrLpoj3S_E1e4ohlaozX-MBn6_h-Sjk and copy it to the GPD WIN.
3. open the document, and right click the "update_win"------choose and left click the"run as administrator"
4. when the page has"PASS". the update finish, and then close the window.
If there is red color in the page,it means that the update fail, do not turn off the device, just try to update again.
Last edited: