Newest Firmware-update and TWRP

mojojojo67

mojojojo67

New Member
Feb 18, 2019
20
2
3
TWRP Recovery can be found here:
https://forum.freaktab.com/forum/tv-...943#post758943
(Made by Magendanz #1518.1)
or here:
https://1drv.ms/u/s!AoqocX31ecnXgbIdSaKxLK3e-SPboA

[HowTo] install TWRP:
1. install "Recovery reboot app" (google playstore)
2. open app and reboot to recovery.
3. in recovery choose "Apply update from EXT",
choose sd-card and ur TWRP-u211-3.2.3.zip file.
4. install
5. reboot....done...
-----------------------------------------------------------------------

Newest stock firmware update TQ20008 _2019-03-25_OTA_flashable.zip
https://www.dropbox.com/s/5l488pgw9a...hable.zip?dl=0

The update is signed, so it can be installed in the Update app, the stock recovery,
or just use TWRP to install the zip-file.
(TWRP 3.2.3 for S905x2-u211 devices -> https://1drv.ms/u/s!AoqocX31ecnXgbIdSaKxLK3e-SPboA )
(but always do a backup first! )

30k3w54.jpg


older firmware-update zip-file TQ20007_3 (2019-01-16)
https://mega.nz/#!mvJ1GQqD!oUs0D9qsv...j2XwQ9_ByaWP5E
[HowTo] install firmware-update:
(At first start of twrp-recovery do a backup !)
1. reboot to twrp-recovery.
2. choose firmware zip-file .
3. install.
4.reboot.


twrp recovery and firmware-update tested, everything ok.


I use "Square-home-launcher" for this Tv Box.
https://www.google.com/url?sa=t&sour...93N46dRdeAJDuS
Looks similar but a lot of options.
smile.png

sFZbGTB




Navigation bar:
https://www.google.com/url?sa=t&sour...-Jxof6Cas30dmD

Taskbar:
https://www.google.com/url?sa=t&sour...8pxBZNTm_5efk5
 
Last edited:
J

JimD

New Member
Feb 27, 2019
19
0
1
Ok i understand it gets done from recovery mode...how do I pit the t95q into recovery mode?
 
J

JimD

New Member
Feb 27, 2019
19
0
1
Ok Mojo...thanks for the instruction..i followed it. It did the update beautifully..no errors.

To test it..i started one movie in kodi to download and about 7 movies in Popcorn time to download at the same time...all with my nord vpn running.

Lasted about 15 mins...it rebooted again.

I felt the device...cool as a cucumber.

Am I just asking too much of the device?
 
mojojojo67

mojojojo67

New Member
Feb 18, 2019
20
2
3
mayb VPN is the problem or just too much download at the same time....
the cpu is ok, but dont expect too much...
its just cheap chinese.... :)
 
J

JimD

New Member
Feb 27, 2019
19
0
1
Yeah...im not limited on the vpn usage..but...i may be being kicked off for using so much bandwidth on the particular at once? Im not sure. I know when I use my full speed without the vpn to download....i rarely reboot...unless im really running heavy like a 30-40gb 4k movie.

Ive ordered a 3gb/64gb h96 pro to test...hopefully it gives better results. Either way...im sending the t95q back. If i need to I can re-order another one later
 
J

Javier Caceres

New Member
Jan 20, 2020
1
0
1
Hi, I have a TV Box T95Q of 4gb of Ram and 64 of Rom, on Saturday I removed the root, it worked fine, until I turned it off. When I turned it on again it no longer passes the loading screen. So download a Firmware for that box and try to flash it with USB Burning Tool. The program recognizes the device, but then starts the restoration, after 5 seconds the device disconnects and I get the error "0x10102002 Romcode / initialize DDR / Initialize PLL / USB Control Setup Error ", I visited several websites but I can't find a solution.

PD: The device does not disconnect if the USB Burning Tool restorer is not started.

Captura.JPG
Help !!!
 
Dave C

Dave C

Well-Known Member
Staff member
Marketing
Sep 1, 2015
1,005
90
48
London
www.droix.co.uk
Try a different USB port on the device. Also try connecting the power supply after connecting the USB and the flashing has started.
 
You must log in or register to reply here.
Top Bottom