Droidbox shuts down by itself
- Thread starter Alexi
- Start date
If you are posting in the T8-SE forum then I am assuming you have this device. If so, you can try a firmware reinstall for the T8-SE by following the guide at https://www.droidboxforums.com/threads/t8-se-firmware-links.12538/. If you have a different model, we have firmware for most of our devices on this forum, check in the appropriate one. If you are not sure what device you have, please email [email protected] with your order number or the full name and post code and we can check. Thanks.
thank you. I’ll try that. I have actually noticed that it is doing it when I plug in an external hard drive. I was never a problem previously, but now that I have unplugged the hard drive it seems to stay on.
will the firmware update resolve this problem?
I don't think the firmware will fix this issue but the hard drive could be the cause. Does the hard drive have its own power supply? If it does not, or you are not using it, then there is a chance it is drawing too much power and switching the device off. Another possibility is that the power supply is failing and not providing enough power.
Sorry I double checked the box. It’s actually a T8-S Plus V2.0. Is there a link for the firmware for that model?
I also tested this with a pen usb drive and the issue still occurs so I don’t think it has to do with the external hard drive consuming too much power
I also tested this with a pen usb drive and the issue still occurs so I don’t think it has to do with the external hard drive consuming too much power
T8-S Plus v2 firmware details can be found at https://www.droidboxforums.com/threads/firmware-links-for-t8-s-plus-v2-devices.10487/
USB pen drives will still draw power (although much less than a hard drive) and cause the issue if the power supply is not providing enough power. It could simply be the USB ports are faulty, have you tried a different port.
USB pen drives will still draw power (although much less than a hard drive) and cause the issue if the power supply is not providing enough power. It could simply be the USB ports are faulty, have you tried a different port.